How do I update the firmware on my Nomiku?

Before updating the firmware on your Nomiku, make sure you are  connected to WiFi, and that your Nomiku is sitting in a water bath above the minimum water level (do not operate the device outside of a water bath).

Once this is complete:

1) Press the Menu button on the Nomiku to go the Main Menu. 

2) Turn the knob on your Nomiku to highlight 'Settings', and then press the Action button on your Nomiku. 

3) Turn the knob to highlight 'Update Firmware', and press the Action button on your Nomiku. 

4) Follow the onscreen instruction while a firmware update is downloaded and applied. This may take a few minutes. Nomiku will reboot when complete.

***Please Note: If you are experiencing 'Low Water' errors on your Nomiku, please try updating your Firmware to see if this will help. If this does not help fix your Nomiku (Cannot update firmware because of the errors or continue to receive errors after updating), please contact Nomiku Support at help@nomiku.com for assistance with this situation.***

See also  how do I reset my Nomiku to factory settings?

Still need help? Contact Us Contact Us