How do I connect to WiFi?

If you have the latest firmware, see this video for a walkthrough of the process.

  1. Ensure Nomiku is placed in a water bath above the minimum water level.
  2. Turn on Nomiku.
  3. Press the menu button to go the Main Menu.
  4. Use the knob to select Quick Start and press the action button.
  5. If "Finding Wifi Networks" or "Select Wi-Fi ID" are shown, your firmware only supports manual mode--see the instructions below.
  6. If "Connect to Nomiku_..." is shown:
    1. Use any device to connect to the wifi network "Nomiku_..." (the network listed on the screen), using the 8 digit passcode displayed
    2. Once on the network, use a web browser to go to wifi.nomiku.com
    3. Select your network from the list and enter the passcode below, then click "Connect"
    4. Your device will reboot and connect to the network

In manual mode:

  1. Nomiku will display a list of available networks.
  2. Select your network and press the action button.
  3. If your network has a password, you will be able to enter it by scrolling through the letters onscreen with the knob, using the action button to pick letters.
  4. When you are done entering the password, use the knob to navigate to the OK button and press action. Nomiku will now connect.

To enter manual mode:

  1. Ensure Nomiku is placed in a water bath above the minimum water level.
  2. Turn on Nomiku.
  3. Press the menu button to go the Main Menu.
  4. Use the knob to select Settings and press the action button. The Settings menu will open.
  5. Select Setup WiFi from the list.

Still need help? Contact Us Contact Us